Skip to content
English
Submit A Request
  • There are no suggestions because the search field is empty.

ShopperSense Firewall Requirements

Firewall Requirements

The ShopperSense device needs only PoE power and outbound HTTPS (port 443) to the following hosts:

  • *.awsglobalaccelerator.com
  • *.amazonaws.com
  • *.panoptyc.com

In addition we need UDP port 123 open for NTP timesync on *.google.com (or time*.google.com) - unless a time server is provided by DHCP config.

Ethernet Switch


If you are using our included IPCAM Ethernet switch, connect the cables as follows:
PoE devices (e.g., Rhombus cameras and ShopperSense) → Ports 1–4 (marked in red)


Internet from your router → Port 5 or Port 6 (marked in green)


IMPORTANT: Ensure the small lever on the ethernet switch is at the 100M setting before powering up the ethernet switch.

  • If it is already powered on. Unplug the switch, set it to 100M, and replug the switch. 

image (35)image (36)